Shaanxi Forkrobot Manufacturing Co., Ltd.
Shaanxi Forkrobot Manufacturing Co., Ltd.
Add to Cart
Abrasive Flow Deburring Polishing and Honing Machine
The two-way reciprocating circulating fluid polishing machine makes the soft abrasive flow through the inner hole,machining surface or end angle by means of the motion extrusion of the upper and lower oil pressure cylinder blocks,and moves up and down for fine grinding,so as to achieve the processing of polishing, deburring and chamfering;This processing method is the most suitable processing method for complex shapes that are not easy to polish,such as various special-shaped holes,tooth surfaces, concave convex surfaces,or for removing cross hole burrs from precision parts. And the grinding direction is consistent,which can effectively improve the performance, quality and service life of the mold or workpiece.After polishing, the finish can reach the mirror grade,and the best surface roughness can reach ra0.025-ra0.01μm.
Machine Size
|
Model |
Height |
Width |
Depth |
Weight |
Remarks |
|
KDL152 |
2100mm |
1310mm |
1200mm |
1.5T |
Specific parameters based on the actual product |
|
KDL252 |
2650mm |
1660mm |
1500mm |
2.5T |
|
|
KDL352 |
2850mm |
1850mm |
2600mm |
4.2T |
|
|
KDL502 |
3350mm |
2200mm |
3300mm |
6.5T |
Other Parameters
|
Model |
Operation Panel |
Abrasive cylinder diameter |
Processing pressure (adjustable) |
Motor power |
Machine voltage |
|
KDL152 |
280mm |
152mm |
1.5~12 Mpa |
3.75KW |
380/50HZ |
|
KDL252 |
320mm |
252mm |
1.5~8.5Mpa |
7.5KW |
380/50HZ |
|
KDL352 |
400mm |
352mm |
1.5~8.5Mpa |
16KW |
380/50HZ |
|
KDL502 |
500mm |
502mm |
1.5~6.5Mpa |
20KW |
380/50HZ |