Shaanxi Forkrobot Manufacturing Co., Ltd.
Shaanxi Forkrobot Manufacturing Co., Ltd.
Add to Cart
Precision Unidirectional Flow Polishing System
The one-way automatic circulating fluid polishing machine uses the lower hydraulic cylinder to move and squeeze,so thatThe soft abrasive is extruded from the same inlet and from other channels,and repeatedly ground toTo achieve the purpose of polishing,deburring and chamfering.This processing method is applicable to all kinds of curved flow channels, elbows or slender pipes,and large internalCavity and other workpieces that are not easy to polish,or precision parts to remove cross hole burrs,is the most importantSuitable processing method. And the grinding direction is consistent,which can effectively improvePerformance,quality and service life of the die or workpiece.After polishing, the finish can reach the mirror grade, and the best surface roughness can reach ra0.2μm.
Machine Size
|
Model |
Height |
Width |
Depth |
Weight |
Remarks |
|
KDL251 |
2700mm |
1700mm |
1550mm |
3.5T |
Specific parameters based on the actual product |
|
KDL351 |
2900mm |
1900mm |
1850mm |
4.5T |
|
|
KDL501 |
3150mm |
2200mm |
2100mm |
6.5T |
|
|
KDLD501 |
3150mm |
2200mm |
2100mm |
6.5T |
Other Parameters
|
Model |
Operation Panel |
Abrasive cylinder diameter |
Processing pressure (adjustable) |
Motor power |
Machine voltage |
|
KDL251 |
500mm |
252mm |
1.5~10Mpa |
11.75KW |
380V/50HZ |
|
KDL351 |
550mm |
352mm |
1.5~8.5Mpa |
15.75KW |
380V/50HZ |
|
KDL501 |
600mm |
502mm |
1.5~8.5Mpa |
23KW |
380V/50HZ |
|
KDLD501 |
600mm |
502mm |
1.5~8.5Mpa |
23KW |
380V/50HZ |